We have launched a new Community! Please post any new forum topics there. This forum will remain available as an archive, but we hope you enjoy the new experience and feature set the latest NCD Community will offer!

6-Channel Off-Board 98% Accuracy 100-Amp AC Current Monitor with IoT Interface

Hello NCD

I have an application that requires measurement of 3Phase 600Volt AC at average current draws of 13Amps but needs to be able to measurement current surges up to 20 Amps.
How large are the clamps and what size wire can they Wire Size: 10 - 6 AWG (Building),

 

B

Hi,

The sensor opening is 10 cm and it can hold upto 000 gauge wire. so 10-6 gauge wires will fine with it.

Let me know if you have any other questions.

Thanks

 

A

Hi,

Thank you for the reply, second question how accurately can they measure down to 1 amp?

Cheers

Carlos

A

Also? 

Is there a coupon code for first-time customers?

Carlos

B

bellow 1A error rate could be around 5%.

We don't have any coupon.

Thanks

 

A

Last question: The current sensors can only handle 110% of the rated load, however with a motir start up the in rush current can  exceed 50 Amps if only for 200ms then with continuous current of between 13.2 and 15.4 Amps. 

Can I safely use the 20Amp unit

Cheers Carlos

B

I will suggest getting a 30A version.

Thanks